40 Channel Low Cost Universal
Test System
with the Revolutionary QSM
Technology
for small volume production PCB Recovery applications.
Features
# PC
& Windows 95 based System.
# 40 Channels
# Testings done using Clips, probes or custom fixtures.
# Uses the proven QSM VI Technique.
# Board Learn & Compare method
# Scans ICs for opens / shorts
# Design Rule Checker for illegal configurations.
# Multiple test parameters
# In-circuit Resistor / capacitor / voltage measurement
# Live compare between two devices or PCBs
# Comprehensive test report
# Multiple trace view for effective analysis.
# Digital Scope mode.
# Optional Circuit-Trace capability.
Specifications
System architecture : QSM VI Trace with switchable reference, multiplexed to 40
clip channels and 2 probe channels.
Controller required : PCAT486 with minimum of 8MB Ram, 100MB HDD
Space, Win95, mouse and SVGA Colour monitor.
Test methods : QSM VI, Interactive Device Scan, Live Compare, Board
Learn and Compare, Resistance, Capacitance and Voltage measurement mode.
Detects open / short between any pins, Digital Scope mode to monitor waveforms.
Comparison method : Linear / Non Linear / % Deviation. User selectable.
Trace Display : Voltage vs Current (VI), Voltage vs
Time (VT) and
Voltage vs Impedance (VZ).
Drive signal : Sinewave for QSM VI.
Amplitude : 2.5V, 8V, 19V & 32V.
Frequency : 65Hz, 250Hz & 2500Hz.
Current Limit : 0.2 mA to a max of 10 mA.
Test Interface : DIP, SOIC, PLCC clips, Custom fixtures, Probes.
Option : Circuit Tracer capability using 2 clips.
Measurements : Voltage:- +/- 32V (tol. +/-5%); Resistance:- 0 to
1 mega ohms (tol. +/-5%); Capacitance:- 10pF to 10,000 uF (tol. +/-10%).
Power : 50W @ 110/220 V AC (Switchable)
Applications
