In-Circuit Functional Test (ICFT)
| Digital Pin Electronics : |
| Drive / Sense Channels | : | Basic 64 channels |
| Drive/Sink Capability | : | 220 mA per channel, fixed drive levels for zero, tri-state and +5V |
| Sense Threshold | : | Programmable from 0V to 5.12V in steps of 20 m.V per step. |
| RAM behind each pin | : | 8K X 4 RAM. |
| Test Speed | : | Programmable from a max. of 2 µs to 16 milli secs. per tick in 14 steps. |
| Guard Channels | : | 8 Ch. Programmable to 0V, 5V or tri-state |
| Library | : | Vast library of 10,000+ devices for TTL, CMOS, INTERFACE, LSI, VLSI devices, User expandable and optional Russian devices. |
| Diagnostic Software | : | Qmax QT1100 Workstation Software runs under MS-Windows 95 / 98 / ME. |
| Test Language | : | Qmax QT1100 IDDE software with QDDL, WEST language and GTPG (Options). |
| DUT Power Supply | : | +5V @ 20 Amps Auto switch on/off under program control. |
| Functions | : | Power-on In-circuit functional test, Unknown Device identify, Auto circuit compensation, Automatic pull-up for open collector testing, User expandable test library; Resistance / Capacitance / Voltage measurement, Power-on pin status indication for pin floats, links, voltages and impedance, logic analyser waveform display, Clear Pass/Fail indication for ease of use, Variable test speed, Optional CircuitTracer function and schematic generation with optional Edwin Software, Integrated testing of ICFT, QSM-VI in one operation. |
| Analog Pin Electronics : |
| Drive/Sense Channels | : | Basic model: 2 Analog Chs. multiplexed to any of the 64 channels and 2 sets of movable probes and reference pins |
| Drive/Sense capability | : | +/ 10mA max; +/32V max. |
| RAM behind channel | : | 8K X 8 bits behind each drive and sense channel. |
| Data rate | : | 2 micro seconds per tick to 16 milli sec. per tick in 14 steps. |
| Drive pattern | : | Sine, Ramp, Triangle, Square or user definable. |
| Function | : | Functional test for Op-amps, Comparators, Transistors, SCR, FETs in out-circuit mode. |
| Expansion Capability : |
| Digital Channels | : | Expandable to 256 channels in steps of 16. |
| QSM-VI Channels | : | 2 Analog channels multiplexed to a maximum of 256 digital channels in steps of 64. |
QSM-VI TRACE
| Channels | : | Basic 64 channels. |
| Probes | : | 2 probes and 2 reference pins |
| Voltage range | : | +/ 2.5V, +/ 8V, +/ 19V, +/ 32V, current ranges from 0.2 mA to max of 10 mA. |
| Frequencies | : | 40Hz, 312Hz, 2.5KHz. |
| Drive Pattern | : | Sine or as required. |
| Function | : | QSM-VI, Impedance & Voltage measurements. |
RCV MEASUREMENT
| Resistance | : | 10 Ohms to 1MOhms. |
| Capacitance | : | 200 pF to 5000 µF. |
| Voltage | : | + / 32 V |
OSCILLOSCOPE
| No. of channels | : | 2 ( Single or dual trace ). |
| Amplitude | : | 0 to 30 Volts |
| Time base | : | 9.6 milli secs. to 80 µsecs. |
| Trigger | : | Auto, normal, single, positive or negative. |
| Input Impedence | : | 1 K.Ohms to 100 K.Ohms |
SHORTS LOCATOR
| Ranges | : | 3 ranges at 200 milliohms, 2 Ohms, 20 Ohms using 4 wire measurements. |
| Resolution | : | 800 µ-ohms in 200 milliohms range. |
| Display | : | Bar graph, and Digital Read-out. |
General
| Physical Dimension | : | Approx. 470 (W) X 410 (D) X 185 (H). |
| Weight | : | 16.5 Kg. |
| Power Requirement | : | 110V @ 4 Amp max / 220 V @ 2 Amp max. |
|
|
 |
|