| Max Channels | : | 2048 ( 8 Mux Cards of 256 channels each) |
| Channels per Mux Board | : | 256 channels |
| Clamp Voltage | : | -2V to +7V in 2.4mV step |
| Current Source | : | +/- 5mA in 0.6µA step |
| | +/- 16mA in 1.9µA step |
| | +/- 50mA in 6µA step |
| Number of Comparators | : | 4 |
| Compare Threshold | : | Four Independent Thresholds
Each can be between -10V to +10V in 2.4mV step |
| Basic Drive Ram | : | 24 bits x 4Meg – used only in RAM Sequence Test. |
| | 8 bits x 4 Meg for 8 bit wait states |
| | 4 bits x 4 Meg Compare RAM |
| | 4 bits x 4 Meg Compare Mask bit |
| Acquisition Ram | : | 4Mx8 (4 bit acquisition and 4 bits reserved). |
| Test Result RAM | : | 8K X 32 bits |
| Interface | : | 32-Bit PCI Interface |
| Test Modes | : | Five Modes |
| Time Base | : | From 1 µs to 256 µs in steps of 1 µs. |
| Wait States | : | From zero to 255 wait states programmable for each test combination independently.
No.of wait states X Time base + 1 Time base unit gives the actual test time for each test combination. |
| Handler Interface | : | Through 32 bit Digital I/O optically isolated. |
| System Requirement | : | IBM PC compatible 200MHz. 200MB Hard Disc Drive free space
(both for Software installation and running software).16 MB RAM. |