In-Circuit Functional Test (ICFT)

Digital Pin Electronics :
Drive / Sense Channels	:	Basic 64 channels
Drive/Sink Capability	:	220 mA per channel, fixed drive levels for zero, tri-state and +5V
Sense Threshold	:	Programmable from 0V to 5.12V in steps of 20 mV per step.
RAM behind each pin	:	8K X 4 RAM.
Test Speed	:	Programmable from a max. of 2 µs to 16 milli secs. per tick in 14 steps.
Guard Channels	:	8 Ch. Programmable to 0V, 5V or tri-state
Library	:	Vast library of 10,000+ devices for TTL, CMOS, INTERFACE, LSI, VLSI devices, User expandable and optional Russian devices.
Diagnostic Software	:	Qmax QT1100 Workstation Software runs under MS-Windows 95 / 98 / ME.
Test Language	:	Qmax QT1100 IDDE software with QDDL, WEST language and GTPG (Options).
DUT Power Supply	:	+5V @ 6 Amps Auto switch on/off under program control.
Functions	:	Power-on In-circuit functional test, Unknown Device identify, Auto circuit compensation, Automatic pull-up for open collector testing, User expandable test library; Resistance / Capacitance / Voltage measurement, Power-on pin status indication for pin floats, links, voltages and impedance, logic analyser waveform display, Clear Pass/Fail indication for ease of use, Variable test speed, Optional CircuitTracer function and schematic generation with optional Edwin Software, Integrated testing of ICFT, QSM-VI in one operation.

Next

Analog Pin Electronics :
Drive/Sense Channels	:	Basic model: 2 Analog Chs. multiplexed to any of the 64 channels and 2 sets of movable probes and reference pins
Drive/Sense capability	:	+/– 10mA max; +/–32V max.
RAM behind channel	:	8K X 8 bits behind each drive and sense channel.
Data rate	:	2 micro seconds per tick to 16 milli sec. per tick in 14 steps.
Drive pattern	:	Sine, Ramp, Triangle, Square or user definable.
Function	:	Functional test for Op-amps, Comparators, Transistors, SCR, FETs in out-circuit mode.
Expansion Capability :
Digital Channels	:	Expandable to 256 channels in steps of 16.
QSM-VI Channels	:	2 Analog channels multiplexed to a maximum of 256 digital channels in steps of 64.

QSM-VI TRACE

Channels	:	Basic 64 channels.
Probes	:	2 probes and 2 reference pins
Voltage range	:	+/– 2.5V, +/– 8V, +/– 19V, +/– 32V, current ranges from 0.2 mA to max of 10 mA.
Frequencies	:	40Hz, 312Hz, 2.5KHz.
Drive Pattern	:	Sine or as required.
Function	:	QSM-VI, Impedance & Voltage measurements.

Next

RCV MEASUREMENT

Resistance	:	10 Ohms to 1MOhms.
Capacitance	:	200 pF to 5000 µF.
Voltage	:	+ / – 32 V

OSCILLOSCOPE

No. of channels	:	2 ( Single or dual trace ).
Amplitude	:	0 to 30 Volts
Time base	:	9.6 milli secs. to 80 µsecs.
Trigger	:	Auto, normal, single, positive or negative.
Input Impedence	:	1 KOhms to 100 KOhms

SHORTS LOCATOR

Ranges	:	3 ranges at 200 milliohms, 2 Ohms, 20 Ohms using 4 wire measurements.
Resolution	:	800 µ-ohms in 200 milliohms range.
Display	:	Bar graph, and Digital Read-out.

General

Physical Dimension	:	Approx. 470 (W) X 410 (D) X 185 (H).
Weight	:	12 Kg. (Approx.)
Power Requirement	:	110V @ 4 Amp max / 220 V @ 2 Amp max.